Juniper Mist

Prepare Certificates

  1. Download the root certificate of the CA that has issued your RADIUS server certificate as described here.

  2. Create a client certificate for your Access Points. If you are using SCEPman Certificate Master, the process is described here

  3. Add the root certificate of the CA that has issued the client certificate on your Access Point to your RADIUS instance as described here.

Mist Configuration

Below settings are the necessary settings to establish a functional RadSec connection with our service. Configure any other settings at your discretion.

  1. Navigate to your Mist configuration plane

  2. To configure the relevant certificates, navigate to Organization > Settings

  3. Add the root certificate of the CA that has issued your RADIUS server certificate under RadSec Certificate

  4. Add your Access Point client certificate (created in step 2 of Prepare Certificates) to AP RadSec Certificate

  5. Go to Site > WLANs

  6. Create a new WLAN if you have not already created one for which you want to leverage RADIUS authentication against our service.

  7. Select Enterprise (802.1X) as Security Type

  8. Under RadSec, select Enabled and set the Server Name to the SAN attribute of your RADIUS Server certificate

  9. For Server Addresses use either the IP address or the DNS name of your RadSec service endpoint.

A complete Run-Through

Last updated